Join Us Virtually at CES 2022! Learn More
Color CMOS (1920x1280) High Dynamic Range (HDR) Image Sensor with PureCel®Plus‑S Technology
  • SKU
    OX03C10-B83Y-001B-Z
  • Category
    Image Sensor - 2MP to 5MP

OMNIVISION’s OX03C10 is a 2.5 Megapixel (MP), ASIL-C image sensor. It provides automotive viewing applications with the combination of a large 3.0 micron pixel size, a high dynamic range (HDR) of 140 dB and the best LED flicker mitigation (LFM) performance for minimized motion artifacts. Additionally, the integration of OMNIVISION’s industry-leading HALE (HDR and LFM engine) combination algorithm uniquely provides top HDR and LFM performance simultaneously. These industry-leading features enable the best image quality for automotive viewing applications, including rearview cameras (RVC), surround view systems (SVS), camera monitoring systems (CMS) and e-mirrors.

Built on OMNIVISION’s PureCel®Plus stacked die technology, this sensor enables pixel performance advantages over non-stacked technology. 3D stacking boosts pixel and dark current performance, resulting in a 20% improvement in the signal-to-noise ratio over the prior generation of its 2.5MP viewing sensors.

The OX03C10 is also the first viewing image sensor with HDR and LFM that can deliver 1920 x 1280p resolution at the highest rate of 60 frames per second (fps), enabling greater design flexibility and faster camera-view switching for drivers. Additionally, it has the lowest power consumption of any LFM image sensor with 2.5MP resolution, along with the industry’s smallest package size, enabling the placement of cameras that continuously run at 60 fps in even the tightest spaces for stringent styling requirements.

The sensor uses OMNIVISION’s Deep Well™, dual conversion gain (DCG) technology to provide significantly lower motion artifacts. Additionally, split-pixel LFM technology with four captures provides the best performance over the entire automotive temperature range.

The OX03C10 features 4-lane MIPI CSI-2 and 12-bit DVP interfaces and is available in both a-CSP™ and a‑BGA™ packages.

OMNIVISION Launches World’s First Image Sensor for Automotive Viewing Cameras with 140 dB HDR and Top LED Flicker Mitigation Performance

OMNIVISION and GEO Semi Launch Automotive Industry’s First Viewing Camera Solution to Simultaneously Provide 140 dB HDR and Highest LED Flicker Mitigation.

Support for image size:
– 1920 x 1280, and any cropped size

PureCel®Plus-S technology

HDR readout modes, with up to 4x captures and on-chip combination:
– On-chip line buffers (alignment with staggered readout)
– DCG (LPD) + SPD + staggered (VS)
– DCG (LPD) + staggered (VS)
– LFM support (SPD)
– PWL mapping from 24-bit to 20, 16, 14, and 12-bit

Motion free HDR (3 capture), 4 capture HDR optimized to minimize motion artifacts

SCCB for register programming

High speed serial data transfer with MIPI CSI-2

Image signal processor functions:
– Lens shading correction
– Defective pixel cancellation
– HDR combination
– Automatic black level correction
– PWL compression, etc.

Safety features for supporting ASIL C applications

Parallel 12-bit DVP output

External frame synchronization capability

Embedded temperature sensor

Embedded supply voltage monitor

One-time programmable (OTP) memory

  • Spec
    OX03C10-B83Y-001B-Z
  • Analog / Digital
    Digital
  • CFA (Chroma)
    Color
  • Image Area
    5814 x 3894 µm
  • Resolution
    2.5MP
  • Package
    a-BGA™
  • Optical Format
    1/2.6"
  • Pixel Size
    3.0 µm
  • Frame Rate
    Full @ 60 fps
  • Power Requirement
    Active: Streaming @ 1280p60: 390 mW (HDR4 combined 24b), streaming @ 1280p30: 290 mW (HDR4 combined 24b)
  • Operating Temperature
    -40°C to +125°C
  • Output Format
    20/16/14/12-bit (PWL) combined HDR (4 captures), Uncompressed 24-bit
  • Shutter Type
    Rolling Shutter
  • Interface
    DVP, MIPI
  • Technology
    Deep Well™, HDR, PureCel®Plus-S