Visit our Customer Experience Center for all of our latest demos Register Now
Color CMOS 1.2 Megapixel (1280x960) High Dynamic Range (HDR) High Definition Image Sensor
  • SKU
  • Category
    Image Sensor - 1MP and Below

OMNIVISION’s OX01D10 is the next-generation 1MP image sensor for automotive viewing applications. The low-power consumption sensor enables rear-view and surround-view cameras with excellent image quality and more scene details via best-in-class resolution and high dynamic range of 110 dB in LFM mode. The image sensor brings together split pixel and dual conversion gain (DCG) technology, delivering motion free high dynamic range HDR to 120 dB and LED flicker mitigation (LFM). These features increase driver safety because more scene details can be captured by rear-view and surround-view cameras while operating over the full automotive temperature range, delivering excellent image quality in demanding lighting conditions, objects in motion, and LED signs/headlights.

The OX01D10 enables the industry’s smallest and most power-efficient viewing camera modules by consuming less than 200 mW at the full 30 fps and providing the highest resolution in a 1/4-inch optical format. Additionally, the sensor has an advanced set of safety mechanisms to enable advanced ASIL features and HDR of 120 dB without LFM. It is AEC-Q100 Grade 2 certified for automotive applications and samples and evaluation kits are available now.

Support for image size:
– 1280 x 960, and any cropped size

Increased pixel array resolution for mechanical alignment support: +40 (H), +60 (V)

HDR readout modes, with 3x captures: DCG (LPD) + SPD, on-chip HDR combination with LFM support LCG (LPD) + SPD + VS, off-chip HDR combination

LED flicker mitigation (LFM)

HDR optimized to reduce motion artifacts

SCCB for register programming

High speed serial data transfer with MIPI CSI-2

Image sensor processor functions:
– Lens shading correction
– Defective pixel cancellation
– HDR combination
– Automatic black level correction
– PWL compression, etc.

Safety features for supporting ASIL applications

Parallel 12-bit DVP output

External frame synchronization capability

Embedded temperature sensor

Embedded supply voltage monitor

One-time programmable (OTP) memory

  • Spec
  • Analog / Digital
  • Category
    1MP and Below
  • CFA (Chroma)
  • Frame Rate
    Full @ 30 fps
  • Image Area
    3740.8 x 2900.8 µm
  • Interface
  • Optical Format
  • Output Format
  • Package
  • Pixel Size
    2.8 µm
  • Power Requirement
    Active: Streaming @ 960p30: 180 mW (measured with FuSa/ASIL off)
  • Resolution
  • Shutter Type
    Rolling Shutter
  • Technology
    HDR, OmniBSI™‑2
  • Use Case
    Viewing Applications - E-mirrors, Viewing Applications - Rear View Camera
  • Operating Temperature
    -40°C to +125°C