This Website uses first and third party cookies. By clicking "agree" or by continuing to browse this Website, you consent to the use of cookies. Read more about these cookies and how to configure them.
Accept
close

Careers Contact Sales
Overview

OmniVision’s OX01E10 is a 1.3 megapixel (MP) SoC in a 1/4” optical format, providing the automotive industry’s best imaging performance for entry-level rearview cameras (RVC) across a wide range of challenging lighting conditions, along with the most compact form factor and lowest power consumption. It integrates a 3 micron image sensor and an advanced image signal processor (ISP), enabling designers to achieve a small form factor with excellent low-light performance, ultra-low power and reduced cost while improving reliability by using only one printed circuit board (PCB).

The OX01E10’s sensor is built on the PureCel®Plus pixel architecture, renowned for its low-light sensitivity and providing the industry’s best SNR performance. Additionally, it provides two on-screen display overlay layers for driver guidelines, as well as distortion correction to straighten any curved edges from lenses with a wide viewing angle.

This is the only imaging device for entry-level RVC that doesn’t require a metal heat sink, allowing plastic camera module bodies to reduce costs. With its compact package size, it enables smaller cameras that can fit in tighter spaces. Additionally, by integrating both the sensor and ISP into a single chip, designers can save on both cost and space by eliminating the second PCB in typical two-chip implementations.

OmniVision’s dual conversion gain technology is employed in this SoC to achieve an HDR of 120 dB with only two captures. Its integrated ISP further enables superior image quality with a number of advanced features, such as lens chromatic aberration correction, and advanced noise reduction and local tone mapping.

The OX01E10 SoC provides a 1340 x 1020 array size at 30 fps. It also enables output flexibility with both 2-lane MIPI and 10-bit DVP interfaces, and is AEC-Q100 Grade 2 certified.

Click here for the press release.

Features

Support for image size:
- 1340 x 1020, and any cropped size

High dynamic range

High sensitivity

Dual conversion gain

ASIL-B safety feature

Image sensor process functions:
- AEC/AGC/AWB
- Lens correction
- Defective pixel correction
- HDR combination
- Tone mapping
- Automatic black level correction

Supported output formats:
- YUV
- RGB888
- BT656
- RAW

SPI master for overlay and loading settings

Distortion correction

50/60 Hz flicker cancellation

SCCB for register programming

Programmable GPIOs

High speed serial data transfer with MIPI CSI-2 or DVP

External frame synchronization capability

Embedded temperature sensor

One-time programmable (OTP) memory

Part Specification
SpecOX01E10-B58Y-1COX01E10-E48Y-1D
Packagea-BGA™a-CSP™
TechnologyPureCel®Plus
HDR
PureCel®Plus
HDR
InterfaceMIPI
DVP
MIPI
DVP
Shutter TypeRolling ShutterRolling Shutter
Resolution1.3MP1.3MP
CFA (Chroma)ColorColor
Analog / DigitalDigitalDigital
Power RequirementActive: 315 mW/300 mW (streaming 1280 x 960 @ 30 fps YUV DVP/MIPI typical)
Active: 270 mW/260 mW (streaming 1280 x 720 @ 30 fps YUV DVP/MIPI typical)
Active: 335 mW/315 mW (streaming 1340 x 1020 @ 30 fps YUV DVP/MIPI typical)
Active: 315 mW/300 mW (streaming 1280 x 960 @ 30 fps YUV DVP/MIPI typical)
Active: 270 mW/260 mW (streaming 1280 x 720 @ 30 fps YUV DVP/MIPI typical)
Active: 335 mW/315 mW (streaming 1340 x 1020 @ 30 fps YUV DVP/MIPI typical)
Output FormatYUV
RGB888
RAW
BT656
YUV
RGB888
RAW
BT656
Operating Temperature-40°C to +125°C-40°C to +125°C
Optical Format1/3.55" for 1340 x 1020 image size1/3.55" for 1340 x 1020 image size
Frame RateFull @ 30 fpsFull @ 30 fps
Pixel Size3.0 µm3.0 µm
Image Area4080 x 3108 µm4080 x 3108 µm
Product GuidePDFPDF
keyboard_arrow_up