Contact Sales

The OV24A sensors are OmniVision's first sensors with 0.9-micron pixels. Built on PureCel®Plus stacked-die architecture, the sensors offer quantum efficiency performance matching that of the latest 1.0-micron pixel sensors. The combination of smaller pixels, higher resolution and improved performance makes the OV24A sensors an ideal camera solution for front- and rear-facing camera applications in high-end smartphones.

The OV24A sensor family consists of three individual products: OV24A1Q, OV24A1B and OV24A10.

The OV24A1Q, with its unique four-cell color-filter pattern, is ideal for front-facing camera applications. This sensor has an on-chip, in-pixel binning feature that captures four times more light photons than a standard 0.9-micron pixel, enabling better image quality in low-light conditions.

When used as the primary, rear-facing camera in a dual-camera configuration, the OV24A1B (monochrome) and OV24A10 (Bayer) sensors enable higher zoom ratios and higher-quality still images and video even in low-light conditions.

All three versions of the OV24A sensors are available in a 1/2.8-inch optical format and support phase detection autofocus and high dynamic range. The sensors are capable of recording ultra-high-quality video in a wide range of resolution formats, including full-resolution 24-megapixel, 4K2K, 1080p and 720p.


Automatic black level calibration (ABLC)

Programmable controls for:
- Frame rate
- Mirror and flip
- Binning
- Cropping
- Windowing

Support for dynamic DPC cancellation

Supports output formats:
- 10-bit RGB RAW
- DPCM 10-8 compression

Supports horizontal and vertical subsampling

Supports typical images sizes:
- 5664 x 4248
- 3840 x 2160
- 1920 x 1080
- 1280 x 720

Standard serial SCCB interface

Up to 4-lane MIPI TX interface with speed up to 2.5 Gbps/lane

Programmable I/O drive capability

Gyro interface with 3-/4-wire SPI support

Embedded 16k bits of one-time programmable (OTP) memory (4k bits reserved for customer use)

4-cell support (OV24A1Q without PDAF):
- 4-cell binning
- 4-cell full
- 4-cell HDR timing

Sequential multi-frame HDR (OV24A10/OV24A1B)

ZigZag HDR timing (OV24A10/OV24A1B)

Three on-chip phase lock loops (PLLs)

Programmable I/O drive capability

Built-in temperature sensor

Typical module size: 8.5 x 8.5 x ~5.5 mm

Part Specification
Shutter TypeRolling Shutter
CFA (Chroma)RGB Bayer
Analog / DigitalDigital
Output FormatRAW
DPCM 10-8 compression
Operating Temperature-30°C to +85°C
Optical Format1/2.83"
Frame RateFull @ 30 fps
Pixel Size0.9 µm
Image Area5112 x 3852 µm
Package Dimensions6148.8 x 4406.4 µm
Product GuidePDF