The OV6922 is a 1/18-inch optical format CMOS image sensor incorporating a high level of functionality and very low power consumption in an ultra-small footprint package. This makes it ideal for use in small disposable cameras for medical imaging applications such as diagnostic and intubation systems.
The 2.1 mm x 2.3 mm CSP packaged sensor enables a microscopic camera module with a 4.0 mm diameter, to make medical procedures even less invasive for the patient.
Having been designed for very low power operation, the OV6922 only requires a clock and a single 3.3-volt DC power supply to get the NTSC composite signal out to a direct interface with a VCR and TV monitor.
The OV6922 is built on OmniVision's proprietary OmniPixel® architecture providing the highest image quality, performance and clarity. It is an ideal solution for medical applications that require both color video and a very small footprint package.
Single chip 1/18" NTSC lens video camera
Composite video output
Automatic exposure/gain/white balance
Aperture correction
Gamma correction
Low power consumption
+3.3V only power supply
Wide dynamic range, anti-blooming, zero smearing
SCCB programmable controls:
- Color saturation
- Exposure
- Gain
- Gamma curve
Spec | OV06922-V09N |
---|---|
Package | CSP |
Technology | OmniPixel® |
Interface | Analog |
Shutter Type | Rolling Shutter |
Resolution | 320 x 240 |
CFA (Chroma) | RGB Bayer |
Analog / Digital | Analog |
Power Requirement | With 75 ohm loading: 30 mA Without loading: 20 mA |
Output Format | Analog |
Operating Temperature | -20°C to +70°C |
Optical Format | 1/18" |
Frame Rate | Full @ 60 fields/sec |
Pixel Size | 2.5 µm |
Image Area | 820 x 625 µm |
Package Dimensions | 2135 x 2265 µm |
Product Guide |