This Website uses first and third party cookies. By clicking "agree" or by continuing to browse this Website, you consent to the use of cookies. Read more about these cookies and how to configure them.

Careers Contact Sales

The OV24A sensors are OmniVision's first sensors with 0.9-micron pixels. Built on PureCel®Plus stacked-die architecture, the sensors offer quantum efficiency performance matching that of the latest 1.0-micron pixel sensors. The combination of smaller pixels, higher resolution and improved performance makes the OV24A sensors an ideal camera solution for front- and rear-facing camera applications in high-end smartphones.

The OV24A sensor family consists of three individual products: OV24A1Q, OV24A1B and OV24A10.

The OV24A1Q, with its unique four-cell color-filter pattern, is ideal for front-facing camera applications. This sensor has an on-chip, in-pixel binning feature that captures four times more light photons than a standard 0.9-micron pixel, enabling better image quality in low-light conditions.

When used as the primary, rear-facing camera in a dual-camera configuration, the OV24A1B (monochrome) and OV24A10 (Bayer) sensors enable higher zoom ratios and higher-quality still images and video even in low-light conditions.

All three versions of the OV24A sensors are available in a 1/2.8-inch optical format and support phase detection autofocus and high dynamic range. The sensors are capable of recording ultra-high-quality video in a wide range of resolution formats, including full-resolution 24-megapixel, 4K2K, 1080p and 720p.


Automatic black level calibration (ABLC)

Programmable controls for:
- Frame rate
- Mirror and flip
- Binning
- Cropping
- Windowing

Support for dynamic DPC cancellation

Supports output formats:
- 10-bit RGB RAW
- DPCM 10-8 compression

Supports horizontal and vertical subsampling

Supports typical images sizes:
- 5664 x 4248
- 3840 x 2160
- 1920 x 1080
- 1280 x 720

Standard serial SCCB interface

Up to 4-lane MIPI TX interface with speed up to 2.5 Gbps/lane

Programmable I/O drive capability

Gyro interface with 3-/4-wire SPI support

Embedded 16k bits of one-time programmable (OTP) memory (4k bits reserved for customer use)

4-cell support (OV24A1Q without PDAF):
- 4-cell binning
- 4-cell full
- 4-cell HDR timing

Sequential multi-frame HDR (OV24A10/OV24A1B)

ZigZag HDR timing (OV24A10/OV24A1B)

Three on-chip phase lock loops (PLLs)

Programmable I/O drive capability

Built-in temperature sensor

Typical module size: 8.5 x 8.5 x ~5.5 mm

Part Specification
Shutter TypeRolling Shutter
CFA (Chroma)B&W
Analog / DigitalDigital
Power RequirementXSHUTDOWN: <1.5 µW
Active: 390 mW
Output FormatRAW
DPCM 10-8 compression
Operating Temperature-30°C to +85°C
Optical Format1/2.83"
Frame RateFull @ 30 fps
Pixel Size0.9 µm
Image Area5112 x 3852 µm
Package Dimensions6148.8 x 4406.4 µm
Product GuidePDF