Download the latest Medical Whitepaper – “Next Gen CMOS Chip-on-Tip Endoscopy interface”. Read Now.
B&W CMOS 1 Megapixel (1280x800) Image Sensor with OmniPixel®3‑GS Technology
  • SKU
    OV09284-E64Y-1A
  • Category
    Image Sensor - 1MP and Below

OMNIVISION’s OV9284 is a 1 megapixel global shutter image sensor that is ideal for in-cabin camera modules in passenger vehicles, where driver state monitoring (DSM) and passenger-monitoring cameras need to be extremely small and unobtrusive, while complying with new, stringent safety regulations. Semiautonomous vehicles use DSM to track the driver’s eye gaze and allow the vehicle to take control when the driver becomes drowsy or distracted. The OV9284 is the industry’s first image sensor with the right balance of cost effectiveness, small form factor, high-quality imaging, and advanced features to meet the needs for incorporating DSM in the mainstream automotive market.

The OV9284 also offers near-infrared (NIR) quantum efficiency (QE) in a driver-monitoring image sensor, with 12% at 940 nm, which allows designers to achieve sufficient illumination with fewer LEDs, thus reducing total system cost and power consumption. This sensor consumes only 90 mW of power at 60 frames per second (fps), which is 30% lower than the nearest competitor. Additionally, the high-speed global shutter sensor with OmniPixel®3-GS technology offers 1280 x 800 resolution at video speeds of up to 120 fps.

This sensor comes in a compact automotive chip-scale package (a-CSP™), which measures 5.2 x 4.5 mm for smaller lens designs. Its 27-degree chief ray angle enables a wider viewing angle in a thinner package, allowing for greater flexibility with camera design and placement.

3 µm x 3 µm pixel with OmniPixel®3-GS technology

Automatic black level calibration (ABLC)

Programmable controls for:
– Frame rate
– Mirror and flip
– Cropping
– Windowing

Support output formats: 8/10-bit RAW

Fast mode switching

Supports 2×2 monochrome binning

Two-lane MIPI serial output interface

DVP parallel output interface

Supports horizontal and vertical 2:1 and 4:1 monochrome subsampling

Support for image sizes:
– 1280 x 800
– 1280 x 720
– 640 x 480
– 640 x 400

Embedded 256 bits of one-time programmable (OTP) memory for part identification

Two on-chip phase lock loops (PLLs)

LED PWM

Built-in strobe control

  • Spec
    OV09284-E64Y-1A
  • Analog / Digital
    Digital
  • CFA (Chroma)
    B&W
  • Image Area
    3896 x 2453 µm
  • Resolution
    1MP
  • Package
    a-CSP™
  • Optical Format
    1/4"
  • Pixel Size
    3.0 µm
  • Frame Rate
    Full @ 120 fps
  • Power Requirement
    Active: 156 mW, Standby: 150 µA, XSHUTDOWN: 150 µA
  • Operating Temperature
    -40°C to +105°C
  • Output Format
    RAW
  • Shutter Type
    Global Shutter
  • Interface
    DVP, MIPI
  • Technology
    OmniPixel®3‑GS