-
SKUOH01A10-A16A-1A
-
CategoryImage Sensor - 1MP and Below
High-Definition, Compact and Cost-Effective Medical Image Sensor for Single-Use and Reusable Endoscopes and Catheters
OMNIVISION’s OH01A10 image sensor leverages PureCel®Plus-S stacked-die architecture to provide the high resolution, compact size and cost effectiveness required for the next generation of disposable and reusable endoscopes and catheters. The OH01A10 is the world’s first medical image sensor to capture 1280 x 800 resolution at 60 frames per second (fps) in a compact 2.5 x 1.5 mm package.
These features make it ideal for many endoscopic devices, including those used in airway management (esophagoscopes, laryngoscopes, thorascopes, pleuroscopes, bronchoscopes, mediastinoscopes); gastrointestinal (gastroscopes, duodenoscopes, amnioscopes); and urology (utero-renoscope) applications.
Compared with previous-generation sensors, the OH01A10 consumes 25% lower power, which keeps the distal tip of the endoscope cooler for greater patient comfort. A high chief ray angle of 32 degrees enables a slimmer module and a wider field of view for flexible endoscopes with tight bend radius and close-focus requirements. Two OH01A10 image sensors can be synchronized to produce stereo, 3D images for surgical procedures.
The OH01A10 has a 1/11-inch optical format and a 1.12-micron pixel size. The sensor supports multiple resolution formats and frame rates with RAW output, including 720p HD at 60 fps in a 16:9 aspect ratio and 800 x 800 at 60 fps for a 1:1 square image for a crisp, jitter-free image. The sensor’s PureCel®Plus-S stacked pixel architecture delivers the highest-quality images with improved sensitivity, high full-well capacity, no blooming and low color crosstalk.
Support for both MIPI and sub-LVDS output interfaces allows the OH01A10 to transmit image data over long distances. It also integrates one-time-programmable (OTP) memory to store manufacturing and calibration information.
The OH01A10 can be autoclaved for reusable devices and sterilized for disposable ones.
Highest resolution in small die size
Best image quality
High frame rate for jitter-free images
PureCel® high color fidelity
– High FWC with less saturation
– Best low light sensitivity
– Almost no blooming
– Low noise
– Better color crosstalk
– Higher QE performance
Supports images sizes:
– 1MP (1280×800)
– 720p (1280×720)
– 800 x 800
– VGA (640×480)
– 400 x 400, and more
Output format can be 8/10-bit RGB RAW
Stereo ready (frame sync)
Sync light source (strobe)
Horizontal and vertical subsampling
Low power
– More than 25% lower power than previous generation
– Low power mode for subsampling modes (less than 10 mW)
On-chip phase lock loop (PLL)
2×2 analog binning
Image quality controls:
– Lens shading
– Denoise
– Manual exposure
– Gain control
– Defect pixel correction
– Automatic black level calibration
Group hold
-
SpecOH01A10-A16A-1A
-
Analog / DigitalDigital
-
Category1MP and Below
-
CFA (Chroma)Color
-
Frame RateFull @ 60 fps
-
Image Area1446.34 x 910.66 µm
-
InterfaceMIPI / LVDS
-
Optical Format1/11"
-
Output FormatRAW
-
PackageCSP
-
Package Dimensions2533 x 1534 µm
-
Pixel Size1.116 µm
-
Power RequirementActive: 82.2 mW, Standby: 0.5 mA, XSHUTDOWN: 2 µA
-
Resolution1MP
-
Shutter TypeRolling Shutter
-
TechnologyPureCel®Plus‑S
-
Use CaseEar / Nose / Throat and Airway Management - Bronchoscope, Ear / Nose / Throat and Airway Management - Mediastinoscope, Ear / Nose / Throat and Airway Management - Pleuroscope, Ear / Nose / Throat and Airway Management - Thoracoscope, Intra Oral Scanner, Stomach and Intestine - Duodenoscope, Urology and Gynaecology - Amnioscope