Join Us Virtually at CES 2022! Learn More
Color CMOS 640 Kpixel (800x800) CameraCubeChip® with PureCel®Plus-S Technology
  • SKU
    OCHSA10-RAMA
  • Category
    CameraCubeChip - 800x800 GROUP

OMNIVISION’s OCHSA10 is the latest member of its growing family of reflowable CameraCubeChip® wafer-level camera modules for medical applications. This module offers an industry leading resolution of 800 x 800 with the highest frame rate of 60 fps, or 400 x 400 resolution at 90 fps, for blur-free images and video. Additionally, the OCHSA10 provides a compact size of 2.6 x 1.6 mm and excellent raw color imaging performance because it integrates an infrared (IR) cut filter, eliminating the chromatic effects from IR light that cause color fidelity loss. This precise color reproduction is crucial for accurately identifying abnormalities within the body.

The powerful OMNIVISION PureCel®Plus-S stacked pixel technology imbues the OCHSA10 with high sensitivity, high full-well capacity, zero blooming, low noise, stabilized black level and low power consumption. Benefits of this pixel architecture also include a buried color filter array for better angular response, a higher chief ray angle and deep trench isolation for reduced crosstalk. These features provide improved image quality over competing architectures.

OCHSA10 offers both 120 deg and 90 deg field of view options, in order to provide doctors, veterinarians and industrial applications with the best possible endoscopic images. To enable use within the body, the OCHSA10 is the only camera module in its class that offers ETO and STERRAD sterilization capabilities, along with waterproofing and biocompatibility. Additionally, it has low power consumption of 82.2 mW to reduce heat at the distal tip of the endoscope for enhanced patient comfort.

Click here for the press release.

OCHSA10 is 800 x 800 CameraCubeChip™ based on OH01A10 color CMOS image sensor

Highest resolution in small die size

Best image quality

High frame rate for jitter-free images

PureCel® high color fidelity
– High FWC with less saturation
– Best low light sensitivity
– Almost no blooming
– Low noise
– Better color crosstalk
– Higher QE performance

Supports images sizes:
– 800 x 800
– VGA (640×480)
– 400 x 400, and more

Output format can be 8/10-bit RGB RAW

Stereo ready (frame sync)

Sync light source (strobe)

Horizontal and vertical subsampling

Low power
– More than 25% lower power than previous generation
– Low power mode for subsampling modes (less than 10 mW)

On-chip phase lock loop (PLLs)

2×2 analog binning support

Image quality controls:
– Lens shading
– Denoise
– Manual exposure
– Gain control
– Defect pixel correction
– Automatic black level calibration

Group hold

  • Spec
    OCHSA10-RAMA
  • Package Dimensions
    2583 x 1584 x 2595 µm
  • Analog / Digital
    Digital
  • CFA (Chroma)
    Color
  • Resolution
    800 x 800
  • Package
    Black Coating
  • Optical Format
    1/14.25"
  • Pixel Size
    1.116 µm
  • Frame Rate
    Full @ 60 fps
  • Power Requirement
    Active: 82.2 mW, Standby: 0.5 mA, XSHUTDOWN: 2 µA
  • Operating Temperature
    -30°C to +85°C
  • Output Format
    RAW
  • Shutter Type
    Rolling Shutter
  • Interface
    MIPI / LVDS
  • Technology
    PureCel®Plus-S