![Automotive Image Sensor with TheiaCel™ Technology Eliminates LED Flicker in Exterior Cameras](https://www.ovt.com/wp-content/uploads/2023/09/OX08D-OV23-PRODUCT-BRIEF-IMAGE-RGB-scaled.jpg)
![](https://www.ovt.com/wp-content/uploads/2023/09/OX08D-IMAGE-SENSOR.png)
-
SKUOX08D10-E92U-001A-Z
OX08D10-E92Y-001A-Z -
Packagea-CSP™
a-CSP™
Automotive Image Sensor with TheiaCel™ Technology Eliminates LED Flicker in Exterior Cameras
The OX08D10 is an 8-megapixel (MP) automotive image sensor that combines all of the most important features, including low-light performance, LED flicker mitigation (LFM), high dynamic range (HDR), small size and low power, eliminating the need for automotive OEMs to make performance / design compromises to address LED flicker. It is the first image sensor to features OMNIVISION’s new 2.1-micron (µm) TheiaCel™ technology, which harnesses the capabilities of next-generation lateral overflow integration capacitors (LOFIC) and OMNIVISION’s DCG™ high dynamic range (HDR) technology to eliminate LED flicker regardless of lighting conditions.
The new OX08D10 achieves overall superior performance in key areas compared to its non-LOFIC-based predecessor – in particular, its LFM dynamic range is 3.3x higher and total dynamic range nearly 3x higher. It features upgraded cybersecurity to comply with the newest MIPI CSE version 2.0 standards.
Support for image size:
– 3840 x 2160, and any cropped size
Up to 4 captures and on-chip combination HDR output:
– HDR4: DCG + LOFIC + VS
– HDR3: LCG + LOFIC + VS
– HDR3: DCG + LOFIC
– PWL mapping 24-bit to 20-, 16-, 14-, or 12-bit
Support for LED flicker mitigation (LFM) using LOFIC
SCCB for register programming
High speed serial data transfer with MIPI CSI-2
ASIL C HW metrics
Image signal processor functions:
– White balance gain
– Defective pixel correction
– Defringe
– Denoise
– HDR combination
– PWL compression, etc.
Cybersecurity for camera/host interface hacking prevention
External frame synchronization capability
Embedded temperature sensor
Embedded supply voltage monitor
One-time programmable (OTP) memory
-
SpecOX08D10
-
Analog / DigitalDigital
-
Category8MP to 13MP
-
CFA (Chroma)RGGB
-
Frame RateFull @ 45 fps
-
Image Area8080.8 x 4552.8 μm
-
InterfaceMIPI
-
Optical Format1/1.73"
-
Output Format20/16/14/12-bit (PWL) combined HDR (4 captures), Uncompressed 24-bit (HDR4)/20-bit (HDR3)
-
Packagea-CSP™
-
Pixel Size2.1 µm
-
Power Requirement742 mW (@ 36 fps), 880 mW (@ 45 fps)
-
Resolution8MP
-
Shutter TypeRolling Shutter
-
TechnologyDCG™, HDR, LFM, PureCel®Plus‑S, TheiaCel™
-
Use CaseSensing Applications - Autonomous Driving, Sensing Applications - Driver Monitoring System, Sensing Applications - Forward facing ADAS