-
SKUOX01B40-U43Y-1A-Z
-
CategoryImage Sensor - 1MP and Below
The OX01B40 is OMNIVISION’s first high-performance color CMOS image sensor to be combined with an image-sensor processor (ISP) in a single, 8.5 x 8.5 mm system in package (SiP). The sensor delivers 120 dB high dynamic range (HDR).
The OX01B40 SiP provides three interface options: digital video port (DVP), MIPI serial interface and NTSC analog interface, allowing a single design to address different applications, thus saving time and money. Resolution is 1392 x 976 with a 2.8 micron pixel size, streaming at 30 frames per second (fps) for MIPI or DVP interfaces, or 60 fps for NTSC.
Built on OMNIVISION’s 2.8 micron OmniBSI™-2 Deep Well™ pixel technology, the OX01B40 delivers best-in-class low-light sensitivity and HDR performance, even in challenging lighting conditions. Power consumption is very low, below 400 mW, allowing efficient thermal management even though the ISP is stacked under the sensor.
The advanced ISP delivers 110 Mp/s throughput for high-quality image capturing and video streaming. Special features include local and global tone-mapping support; distortion and perspective correction for undistorted images at up to a 190-degree angle; and support for static and dynamic overlays of up to eight independent layers with a 32-color palette.
Advanced 110 Mp/s throughput ISP for high quality image capturing and video streaming
Local and global tone mapping support
Up-to three capture HDR combination
Supports distortion correction (DC) / perspective correction (PC), pixel mapping flexibility is up to 190° HFOV
Supports eight independent layers, line and global transparency control for each layer, 32 color/palette per image and sizes up to 1392 x 976 overlay
Embedded information including frame counter, temperature, and register data for each image to enable critical automotive safety applications
Automatic white balance (AWB)
Automatic exposure control (AEC) / automatic gain control (AGC)
Supports statistics data of up to four user programmable ROIs
SCCB for register access
Supports four-wire or two-wire serial interface to retrieve stored firmware from external memory devices
On-chip PLL to generate internal clocks
On-chip voltage regulator from 1.8V to 1.1V and one DCDC from 3.3V/1.8V to 1.1V
Supports 1×4 lane MIPI TX (TX data rate 1.2 Gbps/lane)
Supports 1×12-bit DVP output, speed up to 150 MHz
Embedded 32-bit RISC processor for high performance and flexibility
Supports 1K bits of one-time programmable memory (OTP)
JTAG boundary scan
Embedded temperature sensor
-
SpecOX01B40-U43Y-1A-Z
-
Analog / DigitalAnalog, Digital
-
Category1MP and Below
-
CFA (Chroma)RGB Bayer
-
Frame RateDVP / MIPI: Full @ 30 fps, NTSC: Full @ 60 fps
-
InterfaceAnalog, DVP, MIPI
-
PackageSiP
-
Pixel Size2.8 µm
-
Power RequirementDVP output: 500 mW, measured at room temperature with 1280 x 720 @ 30 fps, measured at room temperature with 1392 x 976 @ 30 fps, MIPI output: 400 mW
-
Resolution1392 x 976
-
Shutter TypeRolling Shutter
-
TechnologyDeep Well™, HDR, OmniBSI™‑2
-
Use CaseViewing Applications - E-mirrors, Viewing Applications - Rear View Camera