Visit our Customer Experience Center for all of our latest demos Register Now
CMOS 720p (1280x720) LCOS Panel
  • SKU
    OVP2200-MAAA-TA
  • Category
    LCOS - Panel GROUP

OMNIVISION’s new ultra-compact and low-power OVP2200 liquid crystal on silicon (LCOS) solution delivers best-in-class 720p high-definition (HD) video at 60 frames per second (fps) to displays in next-generation wearable electronics. The single-chip OVP2200 is supported by the OVP921 companion chip, which provides image processing and further simplifies system design.

The OVP2200 is a single panel, color field sequential device based on a 4.5-micron pixel with a native resolution of 1280 x 720 pixels and a diagonal measurement of 0.26-inch. It uses all-digital technology to produce clear, stable images. The OVP2200’s ultra-compact form factor and low-power consumption make it an ideal LCOS solution for applications ranging from wearable smartphone displays to sports and medical cameras.

The OVP921 provides enhanced system performance without the need for an external image processor. The OVP921 has built-in keystone correction, frame rate conversion, video input scaling, an LED controller, and an embedded 8051 microcontroller (MCU). Additionally, the OVP921 can accept inputs via 24-bit RGB, MIPI or USB.

The HD resolution enabled by the OVP2200 and the OVP921, combined with solid-state light sources, allows customers to create low-cost, compact projection systems with high optical output. These systems are capable of projecting images and video at more than 20 Lumens with LED power at 1.8W with a well-designed optical engine.

Standard 100% digital CMOS technology

No spacers in active area

Digital interface

High aperture ratio

Insensitive to photo-induced carrier generation

Designed for color field sequential operation

Horizontal alignment of 16 pixels

Vertical alignment of 16 lines

  • Spec
    OVP2200-MAAA-TA
  • Active Area
    0.26"
  • Category
    Panel Drivers
  • Color Field Rate
    300 Hz
  • Frame Rate
    Full @ 60 fps
  • Native Device Diagonal
    0.26"
  • Native Resolution
    1280 x 720
  • Operating Temperature
    +10°C to +70°C
  • Panel Dimensions
    17.5 x 6.6 x 3.2 mm
  • Pixel Pitch
    4.5 µm
  • Pixel Size
    4.5 µm
  • Power Consumption
    200 mW
  • Power Requirement
    Active: 200 mW, Standby: 1.5 mW
  • Power Supply
    Core: 1.5V Typical, I/O: 1.5V ±10%, Pixel array: 5.5V Typical
  • Resolution
    720p
  • Use Case
    AR Applications - LCOS for display