Visit our Customer Experience Center for all of our latest demos Register Now
B&W CMOS 1 Megapixel (1280x800) Image Sensor with OmniPixel®3‑GS Technology
  • SKU
    OV09281-H64A
  • Category
    Image Sensor - 1MP and Below
  • Application
    AR / VR / Drones / Robotics - Drone Collision Avoidance, AR / VR / Drones / Robotics - SLAM and Feature Tracking, AR / VR / Drones / Robotics - Human/Computer Interface, AR / VR / Drones / Robotics - Image Sensors

OMNIVISION’s OV9281 and OV9282 are high-speed global shutter image sensors that bring 1 megapixel resolution to a wide range of consumer and industrial computer vision applications, including augmented reality (AR), virtual reality (VR), collision avoidance in drones, bar code scanning and factory automation. Built on OMNIVISION’s OmniPixel®3-GS pixel technology, the OV9281 and OV9282 feature a high-speed global shutter pixel with best-in-class near-infrared (NIR) quantum efficiency (QE) to meet high-resolution and low-latency requirements.

Special features of the OV9281 and OV9282 include region of interest (ROI) selection and context switching. This allows some of the camera settings to change dynamically as fast as alternating frames. The sensors are available in both narrow and wide chief ray angle (CRA) settings.

The 1/4-inch OV9281 and OV9282 capture 1280 x 800 resolution images at 120 frames per second (fps) and VGA resolution at 180 fps with 2-lane MIPI and DVP output. The OV9281 and OV9282 also feature support for frame synchronization and dynamic defective pixel correction.

The OV9281 has a chief ray angle (CRA) of 9 degrees and comes in a chip scale package (CSP). The OV9282 features a CRA of 27 degrees and is available in a reconstructed wafer (RW) format. Both sensors are currently available in volume production.

3 µm x 3 µm pixel with OmniPixel®3-GS technology

Automatic black level calibration (ABLC)

Programmable controls for:
– Frame rate
– Mirror and flip
– Cropping
– Windowing

Support output formats:
– 8/10-bit RAW

Fast mode switching

Supports 2×2 monochrome binning

Two-lane MIPI serial output interface

DVP parallel output interface

Supports horizontal and vertical 2:1 and 4:1 monochrome subsampling

Support for image sizes:
– 1280 x 800
– 1280 x 720
– 640 x 480
– 640 x 400

Embedded 256 bits of one-time programmable (OTP) memory for part identification

Two on-chip phase lock loops (PLLs)

LED PWM

Built-in strobe control

  • Spec
    OV09281-H64A
  • Analog / Digital
    Digital
  • Category
    1MP and Below
  • CFA (Chroma)
    Mono
  • Frame Rate
    Full @ 120 fps
  • Image Area
    3896 x 2453 µm
  • Interface
    DVP, MIPI
  • Optical Format
    1/4"
  • Output Format
    RAW
  • Package
    CSP
  • Pixel Size
    3.0 µm
  • Power Requirement
    Active: 156 mW, Standby: 150 µA, XSHUTDOWN: 150 µA
  • Resolution
    1MP
  • Shutter Type
    Global Shutter
  • Technology
    OmniPixel®3‑GS
  • Use Case
    3D/Machine Vision - 3D depth camera
  • Operating Temperature
    -30°C to +85°C