Visit our Customer Experience Center for all of our latest demos Register Now
OMNIVISION's New Dual-Mode Automotive Image Sensor for Single-Camera Driver State Monitoring and Viewing Applications Can Save Cost, Power and Space
1/2.9" RGB‑Ir CMOS 2‑Megapixel (1600 x 1300) Image Sensor with OmniPixel®3‑GS Technology
  • SKU
    OV02312-E75Y-1B

OMNIVISION's New Dual-Mode Automotive Image Sensor for Single-Camera Driver State Monitoring and Viewing Applications Can Save Cost, Power and Space

OMNIVISION’s OV2312 image sensor is the automotive industry’s first and smallest-in-its-class 2MP, RGB-IR global shutter image sensor. Built on our OmniPixel®3-GS pixel technology, the OV2312 offers advanced ASIL functional safety, industry-leading near-infrared light performance and low power consumption; and facilitate lowest total system cost. The OV2312 provides a dual-mode sensor that fuses human and machine vision capabilities, allowing designers to address both trends with a single camera (e.g., driver state monitoring (DSM) and video conferencing). It delivers motion-artifact-free images at high resolutions of 1600 x 1300 at 60 fps and 1280 x 720 at 90 fps. Additionally, because this is the smallest 2MP GS sensor in its class-offered in a 7.2 x 6.1 mm automotive chip-scale package-cameras can be designed more discretely.

For operation without visible light, the OV2312 features the 3.0 µm OmniPixel®3-GS architecture, which provides an industry-leading near-infrared quantum efficiency of 14% at the 940 nm wavelength, along with excellent modulation transfer function (MTF). Not only does this sensor capture images with the high quality required for driver eye and gaze tracking when running in single mode at 60 fps, it also reduces system power consumption and cost by requiring fewer IR LEDs and by its capability to synchronize with the pulses of the IR light source. The sensor itself only consumes an industry-leading 190 mW in typical conditions. This greatly reduces the heat generated, which is important to guarantee optimal sensor performance for interior cameras that operate continuously in confined spaces. Additionally, its array size of 1600 x 1300 pixels enables reliable monitoring regardless of driver height, seat position or vehicle cockpit design.

OV2312 samples are available now, and it is AEC-Q100 Grade 2 certified for automotive applications.

May 8, 2019: OMNIVISION’s New Dual-Mode Automotive Image Sensor for Single-Camera Driver State Monitoring and Viewing Applications

November 10, 2020: OMNIVISION, Ambarella and Smart Eye Partner on Automotive Industry’s First Combined Driver Monitoring and Videoconferencing Camera Solution

July 20, 2021: Smart Eye and OMNIVISION Announce End-to-End Interior Sensing Solution

3 µm x 3 µm pixel with OmniPixel®3-GS technology

Automatic black level calibration (ABLC)

Programmable controls for:
– Frame rate
– Mirror and flip
– Cropping
– Windowing

Support output formats:
– RGB-Ir RAW 4×4 pattern

Fast mode switching

Two-lane MIPI serial output interface

DVP parallel output interface

Support for image sizes:
– 1600 x 1300
– 1280 x 720

Built-in strobe control

Embedded 128 bytes of one-time programmable (OTP) memory

Two on-chip phase lock loops (PLLs)

Temperature sensor

LED PWM

Low power modes

Frame sync mode

Advanced ASIL safety features

  • Spec
    OV02312-E75Y-1B
  • Analog / Digital
    Digital
  • Category
    2MP to 5MP
  • CFA (Chroma)
    RGB-Ir
  • Frame Rate
    Full @ 60 fps
  • Image Area
    4857.7 x 3955.9 µm
  • Interface
    DVP, MIPI
  • Optical Format
    1/2.9"
  • Output Format
    RGB-Ir
  • Package
    a-CSP™
  • Pixel Size
    3.0 µm
  • Power Requirement
    Active: 190 mW, XSHUTDOWN: <25 µA
  • Resolution
    2MP
  • Shutter Type
    Global Shutter
  • Technology
    OmniPixel®3‑GS
  • Use Case
    Sensing Applications - Driver Monitoring System
  • Operating Temperature
    -40°C to +125°C