-
SKUOC0VA1B-RAOA
-
CategoryCameraCubeChip - VGA GROUP
OMNIVISION’s OCOVA wafer-level camera module is the first CameraCubeChip® module with Nyxel® technology and features the industry’s smallest pixel size of 2.2 microns. The OC0VA expands our family of the industry’s smallest GS imagers by providing a VGA resolution option with the best NIR performance in a global shutter device. Existing VGA global shutter devices have low near-infrared (NIR) quantum efficiency (QE) and high modulation transfer function (MTF) degradation, which requires a stronger light source with high power consumption and low performance. The OCOVA features OMNIVISION’s PureCel®Plus-S stacked pixel architecture and Nyxel® NIR technology to enable optimal performance and precision along with industry-leading QE and excellent MTF for sharp, accurate images in machine vision and 3D sensing applications.
The OC0VA is ideal for a wide range of consumer and industrial machine vision and 3D sensing applications that need a global shutter to avoid motion blur, along with top NIR performance that reduces system power consumption by requiring less IR LED illumination in low- and no-light conditions. It combines image sensor OG0VA with image signal processing and optics into a compact wafer-level camera module. The wafer level module’s low light sensitivity is excellent, with significantly lower gain than the industry’s typical 3.0 micron pixel size for an improved signal-to-noise ratio. Target applications include facial authentication and eye tracking in smartphones and notebooks, as well as imaging for AR/VR headsets, drones and robots.
The OCOVA’s high MTF enables sharper images with greater contrast and more detail, which helps to enhance machine vision decision-making processes. Additionally it features a high QE of 40% at 940 nm and 60% at 850 nm. This industry-leading QE enables devices to see farther and better in low- and no-light conditions, which allows designers to use less IR LED light and achieve lower system-level power consumption. For AR/VR headsets, this reduces heat generation, while industrial and robotics applications can use fewer IR LEDs for lower system cost, or use the same number to achieve a greater image detection range.
2.2 µm x 2.2 µm pixel with PureCel®Plus-S Global Shutter and Nyxel® technology
Automatic black level calibration (ABLC)
Programmable controls for:
– Frame rate
– Mirror and flip
– Cropping
Support output formats: 10-bit RAW RGB
Fast mode switching
Supports horizontal and vertical 2:1 subsampling
Supports 2×2 binning
1-lane MIPI/LVDS serial output interface
Support for image sizes:
– 640 x 480
– 320 x 240
Embedded 128 bytes of one-time programmable (OTP) memory for part identification
Two on-chip phase lock loops (PLLs)
Built-in strobe control
Support for multi-sensor mode operation
-
SpecOC0VA1B-RAOA
-
Analog / DigitalDigital
-
CategoryVGA
-
CFA (Chroma)B&W
-
Frame RateFull @ 240 fps
-
Image Area1443.2 x 1091.2 µm
-
InterfaceMIPI / LVDS
-
Optical Format1/10"
-
Output FormatRAW
-
PackageBlack Coating
-
Pixel Size2.2 µm
-
Power RequirementActive: 139 mW, Standby: 1 mA, XSHUTDOWN: 30 µA
-
ResolutionVGA
-
Shutter TypeGlobal Shutter
-
TechnologyNyxel®, PureCel®Plus-S